The Probler P2 Gun is lightweight and easy to maneuver – even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force – much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
For high output spray polyurethane foam and polyurea applications.
- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Anti-crossover design virtually eliminates possibility of material entering the air piston
- Ergonomic handle and balanced design
Product Manuals
Sales Literature
Certifications
- 308207, Antisieze Fel-Pro N-5000, Safety Data Sheet, English (382 KB)
- MSD023EN, Fusion Quik-Shot Gun Grease, Safety Data Sheet, English (215 KB)
- MSD025J, Fusion Gun Grease, Safety Data Sheet, English (421 KB)
- MSD199, Loctite 222MS Low Strength Threadlocker, Safety Data Sheet, English (344 KB)
- MSD209, Super Lube Multi-purpose Synthetic Grease with Syncolon (PTFE), Safety Data Sheet, English (1 MB)
| Mix Chamber Size | 01 (.042), 02 (.052) |
|---|---|
| Air Inlet Size (cm) | 0.635 |
| Air Inlet Size (in) | 1/4-18 |
| Air Inlet Size (mm) | 6.35 |
| Air Inlet Thread Gender | Male |
| Air Inlet Thread Type | NPSM |
| Applicator Type | Manual |
| Compatible Material | Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam |
| Component A Inlet Size (in) | 1/2-20 |
| Component A Inlet Thread Type | UNF |
| Component B Inlet Size (in) | 7/16-18 |
| Component B Inlet Thread Type | UNF |
| Component Type | Plural-Component |
| Fluid orifice size (in) | 0.042 |
| For Use With | Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment |
| Gun Activation | Manual |
| Gun Included | 1 |
| Gun Type | Air Purge Gun |
| Gun Weight (lb) | 3.9 |
| Maximum Air Inlet Pressure (MPa) | 0.76 |
| Maximum Air Inlet Pressure (psi) | 110 |
| Maximum Air Pressure (MPa) | 0.76 |
| Maximum Air Pressure (psi) | 110 |
| Maximum Fluid Pressure (MPa) | 24.1 |
| Maximum Fluid Pressure (psi) | 3500 |
| Maximum Fluid Temperature (°C) | 93 |
| Maximum Fluid Working Pressure (MPa) | 24.1 |
| Maximum Fluid Working Pressure (psi) | 3500 |
| Minimum Air Inlet Pressure (MPa) | 0.62 |
| Minimum Air Inlet Pressure (psi) | 90 |
| Model | P2 |
| Overall Height (cm) | 12.1 |
| Overall Length (cm) | 7.9 |
| Overall Width (cm) | 17.4 |
| Pattern Size (mm) | 304.8 |
| Product Type | Spray Gun |
| Purge Method | Air |
| Series | Standard |
| Spray Gun Mix Type | Impingement |
| Spray Pattern | Flat |
| Trigger Lock | Locking |
| Wetted Parts | Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE |
Related products
